main program

The software system is made up of main program, ISR .

系统软件由主程序 、 中断服务子程序组成.

Having nonlinear graph of data structure as model, this paper designs one city's tour-guide inquiring program and gives C alike algorithm of main program and key function. WTO Consultancy

以非线性数据结构图为模型，设计了某市导游咨询程序，并给出了其核心函数的类C语言算法

The main program of MATLAB is presented and some processing results based on edge processing of the soft morphology and traditional methods are listed.

文章给出了MATLAB实现的主程序，列出了一些柔性形态学处理和传统边缘检测处理的结果。

A related parameter can be given in the main program, and then call the subprogram like a fixed cycle to finish the trapezoid thread's machining program.

这样就可以像固定循环一样，在主程序中给定相应的参数，然后调用子程序，就可完成相应的梯形螺纹加工程序的编写。

In the aspect of software designing, the main program and timer interrupt subprogram as well as module subprograms are designed, the module algorithms are explained detailedly.

在软件设计方面，设计了主程序和定时器中断子程序及各模块子程序，并对各部分算法进行了详细说明。

The key modules are as follows: the main program, timer interrupt initialization subroutine, AD initialization subroutine, DMA interrupt subroutine and signal preprocessing subroutine.

给出了完整的软件设计，主要模块有：主程序设计、定时器中断子程序、A/D初始化子程序、DMA中断子程序和信号预处理子程序。

The main program and subroutines are programmed in C language. Thermo-mechanical Coupled Analysis of Continuous Cast Rolling Process Using MARC Subroutines

测试单元所用主程序及子程序均采用C语言编制。基于MARC二次开发的连续铸轧热力耦合分析

Hardware structure chart and main program flow chart are given in the thesis.

文中给出了硬件结构框图和主程序流程图.

This paper expounds circuit form and work principle and main program flow of the debugger system, and detailedly introduces function of each composing part.

本文阐述了调试器系统的电路组成和工作原理，介绍了调试器系统的主程序流程，并详细地介绍了各组成部分的功能。

Note that the SPE code is written as a new main program and code is generated for it prior to embedding through the handle into the PPE code.

注意，SPE代码被编写为一个新的主程序，并在通过句柄嵌入PPE代码之前为它生成代码。

Analysis of Key Problems about the Main Program in the CNC for a Flame Cutting Machine

数控切割机主控程序分析

And the SCM software system is composed of main program, serial interrupt service program, data transform subprogram, timer interrupt service program and pulse output subprogram.

下位机软件系统主要由主程序、串行中断服务程序、数据转换子程序、定时器中断服务程序和脉冲输出子程序构成。

The programs include the main program and the test program.

程序设计包括主程序和测试程序设计。

Program design, expounded the method to improve program operation efficiency, introduced program flow and time allotment of main program module. 7.

程序设计，阐述了提高程序运行效率的方法，介绍了主要程序模块的程序流程与时间分配。

The structure of the main program was clear, and the Software completed the corresponding function by calling the subfunction. All program modules had been linked into an executable files after compiled separately, then copied to EPROM.

主体程序结构清晰，通过调用子函数完成相应功能，各程序模块分别编译调试后再连接定位成可执行文件写入EPROM中。

MCU program structure divides into two parts as main program and timer interrupt service program, after many times' testing and running, the program runs steadily and reliably.

单片机程序结构分主程序和定时器中断服务程序两个部分，经过反复试验运行，程序运行稳定可靠。

This paper describes the teletext receiver developed in accordance with the Chinese Broadcast Teletext Specification ( WG& 84), the processing method of the multiplex data and the main program block diagram.

本文给出了一种按我国电视文字广播试验规范（WG&84）研制的接收机的构成、多工信号处理方法及主要程序流程。

The DSP control software is roughly divided into main program, timer interrupt service routine and AD conversion interrupt service routine.

DSP控制软件主要分主程序、定时器中断服务程序和AD转换中断服务程序。

It gives the flow charts of main program, the AD sampling, generate reference sine wave, the timer interrupt of the SPWM and does related experiments.

在软件方面，给出了主程序、AD采样、产生基准正弦波、定时器中断产生SPWM的软件流程图，并进行相关的实验。

The main program is used for the initiation of the chip, flags polling, events treatment, data calculation, keys treatment, buffers of display refresh and so on. And the function of heart rate control speed is realized based on cardiotach ometer.

主程序主要实现系统初始化、各状态标志位的轮询、事件处理、数据计算、键值处理、显示缓冲区刷新等功能，并在心率计设计的基础上，实现了心率控制速度功能。

Among them, main program is in charge of initialization and key-display processing, timer interrupt service routine, is designed to implement vector control algorithm, three close-loop regulators and the generation of SVPWM signals as core program.

主程序负责初始化和键显处理，定时器中断服务程序作为核心程序实现矢量控制算法、三闭环调节器设计和SVPWM信号发生，AD转换中断服务程序为系统保护功能提供基础之一。

A separate help program that obscures the main program cannot do this.

单独的帮助程序遮盖了主程序,做不到这一点.

As the main program of the "Chinese Bridge" project, the Confucius Institutes play an important role in the "Going global" strategy for Chinese culture development.

孔子学院作为“汉语桥”工程的主要项目，是中国文化发展“走出去”战略的重要举措。

Trojan Trojan scheduling the completion of the main program to start the service module, the process of hiding modules, as well as the encryption module, when done in the communication of data encryption and decryption.

木马主程序完成调度木马的服务启动模块，进程隐藏模块，以及加密模块，在通信时做到数据的加解密。

The entire temperature measurement system is under the control of the main program. The design and production of system for industrial field precision thermometer automatic calibration system is tested.

整个温度测量系统在主程序控制下工作；对设计和制作完成的系统进行了工业现场精密温度计自动校准系统的试验，获得了试验数据，并对数据进行了分析。

The software design of the system has been completed, including software design of collecting module and communicating module, design of the main program, fuzzy control program, and PC-based monitoring interface.

完成了系统的软件设计，主要包括系统主程序的设计，采集模块的软件设计，模糊控制程序的设计，上位机监控界面的设计，以及通讯模块的软件设计。

The software design part of the system was divided into several function modules with modular design method, such as main program, temperature measurement module, ultrasonic distance measuring module, LCD display module, and voice alarm module.

软件部分采用模块化设计思想，将系统的软件设计分为主程序、测温模块、超声波测距模块、LCD显示模块和语音报警模块等功能模块的程序设计，由主程序实现对各分模块的调度管理。

You can run each module will be loaded into the main program ( if you install the appropriate module).

可以在运行时将各个模块加载到主程序中（如果安装了相应模块）。

In this paper, the designing method and work theory of IP telephone are introduced especially. At the same time the circuit diagram and main program design frame are presented.

文中着重介绍了IP电话的实现方法和低功耗电路设计思想，给出了IP电话机的整体框图和部分电路图以及主程序设计框图。

The flow chart of main program and interrupt subprogram of the time service device and the electronic clocks were presented in the system.

论文的软件编写采用C51，给出了授时器、电子时钟的主程序和中断子程序框图。